Friday, June 14, 2013

A Little Update...



Hello All! Sorry I've been slacking on updating my blog. Just can't seem to set some time aside to update this  all the while juggling being a Mommy, Wifey, and full time worker bee! It's easier to just update my Facebook or my Instagram account. So go find me!

Anyway, here's what I've been working on for the last week. So awhile back you saw my post about refinishing an old dresser and transforming it into a media console. I bought an old-really-beat-up dresser off Craigslist for $50. Which at the time, I still thought I paid too much for because it was in such bad condition. Some of the drawers were falling apart and wood was chipping off every where. I even had doubts that it couldn't possibly turn out how I wanted it to and even thought about throwing it away!

Well, I'm glad I stuck with it and started on the piece. So I'll take you through on what I did.

After taking off all of the handles and taking out all the drawers, I primed everything with my favorite spray primer. [Rust-o-leum Ultra Cover 2x] You can pick this up anywhere, I got mine at Home Depot. I got two cans just in case but one can was enough for all the drawers and the dresser piece. I didn't sand the piece because the surface was not shiny or slick. It was quite dull and beat up as it was.

After I primed everything, I then took a small paint brush and hand painted the drawers. At first I used a foam brush, which didn't work out very well because it could not get into the nook and cranny of all the details on the drawer.

The paint I chose for this was Behr - Light French Gray in Satin finish. A pint will do.


I applied TWO coats of paint on all of the drawers. When I started on the main dresser, I switched to a larger brush and did the sides and top with a small roller so that the paint strokes wouldn't be as visible.

After everything was painted, I realized one of the drawers [which happened to be the middle piece] would not be fixable. So I just opted to leave it out and leave an open space for the cable box on the top.

Even with one missing drawer, I must say my hubby did a great job framing out the shelf. He used thin plywood and measured it out to fit that slot. After painting that and retouching up a few spots, here is how the dresser looks like now. 


Later on, Hubby will drill a small hole in the back of the dresser so that we can feed the wires through for the cable box.

:)


I'm glad I stuck it out from start and finish on this project. I'll be finishing off the top piece with the Polyurethane spray just to seal the paint from chipping on top. I kind of like the semi-matte finish on the dresser so I don't think I'll be spraying much of the Poly on the entire dresser.

Once we get the dresser into the Master Bedroom, which involves some STAIRS, then I will repost a picture of the final look. The dresser should then be fully functional with all of our files and documents and all dressed up. 

So what do you guys think? Is this Pinterest Appoved??? :)


-----------
Lita

No comments:

Post a Comment